SAUNA PRO

Sauna i basen na zegarku Garmin, od bramki do bramki.

Sauna and pool on your Garmin watch, gate to gate.

Pierwsze kroki

  1. Zainstaluj Sauna Pro ze sklepu Connect IQ i uruchom ją na zegarku przy bramce.
  2. Sesja startuje sama (albo po START, jeśli wyłączysz autostart). Zegar biletu zaczyna odliczać.
  3. Wchodzisz do sauny: BACK / LAP. Każde kolejne naciśnięcie to następna faza: sauna, zimno, relaks, sauna...
  4. Na koniec START, potem "Zapisz". Sesja trafia do Garmin Connect jako aktywność.

Przyciski i dotyk

PrzyciskCo robi
STARTStart sesji. W trakcie: pauza i menu sesji (Wznów, Szatnia, Zapisz, Podsumowanie, Ustawienia, Odrzuć).
BACK / LAPNastępna faza. Przy pauzie: wznowienie.
DOWNCofa przypadkowe przejście do następnej fazy.
przytrzymaj UPUstawienia. Nagrywanie trwa dalej.
UP (zegarki dotykowe)Blokada ekranu dotykowego, żeby para i woda nie klikały za Ciebie.
dotknięcie polaWybór, co pokazuje to pole.
dotknięcie kafelka fazyPrzejście prosto do tej fazy.

Zegar biletu

Ustawiasz, ile trwa Twój bilet (Ustawienia, Bilet). Zegarek odlicza czas od wejścia, pokazuje godzinę wyjścia i ostrzega wibracją: wcześniej, że czas zbierać się do wyjścia, i drugi raz tuż przed końcem. Po czasie przypomina co 5 minut. Spóźniasz się albo dokupiłeś czas? "Dodaj czas" i "Odejmij czas" zmieniają bilet w trakcie.

Fazy i rundy

Fazy to PRZYGOTOWANIE, SAUNA, ZIMNO i RELAKS. Każda ma swój kolor, stoper i opcjonalny cel (Ustawienia, Cele faz), po którym zegarek da znać.

Runda liczy się dopiero wtedy, gdy w saunie spędzisz co najmniej 15 sekund. Dzięki temu możesz szybko przeskoczyć fazę (np. przypadkowe naciśnięcie albo tylko przejście przez saunę) i nie psuje to licznika rund ani statystyk.

Bezpieczeństwo

Sauna Pro nie jest urządzeniem medycznym. Słuchaj swojego ciała i pij wodę.

Wygląd

Styl Focus

Cały ekran w kolorze fazy, duży stoper. Warianty: Panele, Tarcza, Kwadrat i Jasny. W wariancie Kwadrat wybierasz liczbę kafelków: 2, 4 albo 6. Każde pole możesz zmienić i pokolorować (Wygląd, Pola).

Styl Classic

Siatka pól w pięciu układach (Hero, Klasyczny, Kwadrat, Sześć, Duo) i 16 motywów kolorów, w tym "Własny", gdzie ustawiasz każdy kolor, czcionkę, grubość pierścienia i zaokrąglenia.

Pola, ikony, kolory

W każdym polu wybierasz jedną z ponad 20 wartości (tętno, stres, temperatura, bilet, godzina wyjścia, rundy, sumy faz, kalorie, pot, SpO2, oddech...). Każde pole może mieć własny kolor wartości, etykiety i ikony. Zestawy ikon: Auto, Kreskowe, Motywu, Plakietki albo bez ikon.

Tętno w procentach

Panel tętna pokazuje rezerwę tętna: tętno spoczynkowe z profilu Garmin to 0%, tętno maksymalne to 100%. Pasek ma pięć odcinków po 20% w kolorach stref.

Ustawienia z telefonu

Wszystko, co ustawisz na zegarku, ustawisz też w aplikacji Connect IQ na telefonie: Sklep Connect IQ, Moje aplikacje, Sauna Pro, Ustawienia. Zmiany trafiają na zegarek po synchronizacji.

Po saunie

FAQ

Dlaczego numer rundy się nie zmienił?

Runda liczy się dopiero po 15 sekundach w saunie. Krótsze wejście traktujemy jak przypadkowe albo przejście i pomijamy je w licznikach.

Co oznacza procent obok tętna?

Rezerwę tętna: 0% to tętno spoczynkowe z Twojego profilu Garmin, 100% to tętno maksymalne. W spoczynku widzisz więc np. 5-15%, w gorącej saunie więcej.

Czy pauza zatrzymuje bilet?

Nie. Bilet to czas na basenie, więc liczy dalej także w Szatni i przy pauzie.

Po wgraniu pliku .prg widzę ikonę IQ z wykrzyknikiem.

Plik .prg jest budowany dla jednego konkretnego modelu zegarka. Plik dla innego modelu (np. fēnix 8 47 mm na fēnix 8 Pro) się nie uruchomi. Najprościej instalować ze sklepu Connect IQ, który sam dobiera wersję. Jeśli wgrywasz ręcznie, użyj pliku dla swojego modelu i skopiuj go do folderu GARMIN\Apps.

Dlaczego w stylu Focus nie ma wyboru motywu?

Focus ma własne kolory: tło w kolorze fazy. Motywy działają w stylu Classic. W Focus menu są ciemne z pomarańczowym akcentem, a w wariancie Jasny jasne.

Zegarek nie pokazuje temperatury.

Temperatura pochodzi z czujnika w zegarku. Czujnik na nadgarstku pokazuje ciepło skóry i zegarka, więc w saunie rośnie z opóźnieniem.

Inne aplikacje

Sauna ProSauna i basen, od bramki do bramki.
WkrótceTu pojawią się kolejne aplikacje.

Podoba Ci się aplikacja? Postaw kawę.

Getting started

  1. Install Sauna Pro from the Connect IQ Store and open it on your watch at the gate.
  2. The session starts by itself (or with START if auto-start is off). The ticket clock starts counting down.
  3. Going into the sauna: BACK / LAP. Every press moves to the next phase: sauna, cold, rest, sauna...
  4. To finish, press START, then "Save". The session is saved to Garmin Connect as an activity.

Buttons and touch

ButtonWhat it does
STARTStarts the session. During it: pause and the session menu (Resume, Locker room, Save, Summary, Settings, Discard).
BACK / LAPNext phase. When paused: resume.
DOWNUndoes an accidental phase change.
hold UPSettings. Recording keeps running.
UP (touch watches)Touch lock, so steam and water can't tap for you.
tap a fieldChoose what that field shows.
tap a phase cardJump straight to that phase.

Ticket clock

Set how long your ticket is (Settings, Ticket). The watch counts down from the gate, shows the time you have to leave, and vibrates twice: once when it is time to start heading out, and again just before the end. After the end it reminds you every 5 minutes. Running late or bought extra time? "Add time" and "Take time off" change the ticket on the go.

Phases and rounds

The phases are PREP, SAUNA, COLD and REST. Each has its own colour, timer and optional target (Settings, Phase targets) that the watch alerts you about.

A round only counts once you have spent at least 15 seconds in the sauna. That way you can skip quickly through a phase (an accidental press, or just walking through) without it spoiling your round count or statistics.

Safety

Sauna Pro is not a medical device. Listen to your body and stay hydrated.

Look

Focus style

The whole screen in the phase colour, with a big timer. Variants: Panels, Dial, Square and Light. On Square you choose the number of tiles: 2, 4 or 6. Every field can be changed and coloured (Look, Fields).

Classic style

A grid of fields in five layouts (Hero, Classic, Quad, Six, Duo) and 16 colour themes, including "Custom", where you set every colour, the font, the ring width and the corner radius.

Fields, icons, colours

Each field shows one of more than 20 values (heart rate, stress, temperature, ticket, exit time, rounds, phase totals, calories, sweat, SpO2, breathing...). Each field can have its own value, label and icon colour. Icon sets: Auto, Line, Theme, Badges or none.

Heart rate in percent

The heart-rate panel shows your heart-rate reserve: resting heart rate from your Garmin profile is 0%, maximum heart rate is 100%. The bar has five 20% segments in the zone colours.

Settings from your phone

Everything you can set on the watch can also be set in the Connect IQ app on your phone: Connect IQ Store, My apps, Sauna Pro, Settings. Changes reach the watch at the next sync.

After the sauna

FAQ

Why didn't the round number go up?

A round only counts after 15 seconds in the sauna. A shorter visit is treated as accidental or a walk-through and left out of the counters.

What is the percentage next to my heart rate?

Heart-rate reserve: 0% is the resting heart rate from your Garmin profile, 100% is your maximum. At rest you will see something like 5-15%, more in a hot sauna.

Does pausing stop the ticket?

No. The ticket is your time at the spa, so it keeps counting in the locker room and while paused.

After copying a .prg file I see an IQ icon with an exclamation mark.

A .prg file is built for one specific watch model. A file for a different model (e.g. fēnix 8 47 mm on a fēnix 8 Pro) will not start. Installing from the Connect IQ Store picks the right build for you. If you side-load, use the file for your model and copy it to GARMIN\Apps.

Why is there no theme choice in the Focus style?

Focus has its own colours: the background follows the phase. Themes apply to the Classic style. In Focus the menus are dark with an orange accent, or light with the Light variant.

The temperature seems low.

Temperature comes from the watch's own sensor. On the wrist it reads skin and watch warmth, so in the sauna it rises with a delay.

More apps

Sauna ProSauna and pool, gate to gate.
Coming soonMore apps will be listed here.

Enjoying the app? Buy me a coffee.